Simple enough mod to stop oil builing up in your intake pipework...purchase a small K&N valve breather filter and a small pipe bend (i used a copper plumbing one) and some sort of stopper or plug...use the plug to block up the hole in the intake pipe after you pull the connecting hose out(i used the bottom cap of a round schoolchair leg -perfect fit!)..thats that end sorted,oil will never get in there again!!...now using the pipe angle push it on the breather outlet pipe on the cam cover and sleave over it with rubber hose and hose clamp it up...pop the filter on the other end and tighten that on ...done.... For more style make an aluminium catch can with nice hose running into it and put the filter on the can..mount anywhere!!
